View C1210X393JZGACAUTO_8819245.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 ordering information c 2225 x 393 j c g a c auto ceramic case size (l" x w") specifcation/ series capacitance code (pf) capacitance tolerance 1 rated voltage (vdc) dielectric failure rate/ design termination finish 2 packaging/grade (c-spec) 0805 1206 1210 1808 1812 1825 2220 2225 x= flexible termination two signifcant 1 additional capacitance tolerance offerings may be available. contact kemet for details. 2 additional termination fnish options may be available. contact kemet for details. overview kemets automotive grade high voltage with flexible termination (hv ft-cap) surface mount mlccs in c0g dielectric address the primary failure mode of mlccsC fex cracks, which are typically the result of excessive tensile and shear stresses produced during board fexure and thermal cycling. featuring several of the high est cv (capacitance/voltage) values available in the industry, these devices utilize a pliable and conductive silver epoxy between the base metal and nickel barrier layers of the termination system. the addition of this epoxy layer inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating fex cracks which can result in low ir or short circuit failures. although fexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior fex performance over stand ard termination systems. kemets high voltage surface mount mlccs in c0g dielectric feature a 125c maximum operating temperature and offers the most stable voltage and temperature performance of all ceramic dielectric materials. c0g (np0) dielectric capacitors exhibit no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. capacitance change is limited to 30ppm/oc from ?55c to +125c . these devices exhibit low esr at high frequencies and fnd conventional use as snubbers or flters in applications such as switching power supplies and lighting ballasts. their exceptional performance at high frequencies has made high voltage mlccs the preferred dielectric choice of design engineers worldwide. in addition to their use in power supplies, these capacitors are widely used in industries related to automotive (hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. whether under-hood or in-cabin, these capacitors are designed to provide reliable performance in mission and safety critical automotive circuits. stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. kemet automotive grade series capacitors meet the demanding automotive electronics councils aec-q200 qualifcation requirements. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade) one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 packaging c-spec ordering options table packaging type 1 packaging/grade ordering code (c-spec) 3 7" reel auto 13" reel / unmarked auto7411 (eia 0603 and smaller case sizes) auto7210 (eia 0805 and larger case sizes) 7" reel/unmarked/2 mm pitch 2 3190 13" reel/unmarked/2 mm pitch 2 3191 1 reeling tape options (paper or plastic) are dependent on capacitor case size (l x w) and thickness dimension. see chip thickness/tape & reel packaging quantities and tape & reel packaging information. 2 the 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. this option is limited to eia 0603 (1608 metric) case size devices. for more information regarding 2 mm pitch option see tape & reel packaging information. 3 all automotive packaging c-specs listed exclude the option to laser mark components. please contact kemet if you require a laser marked option. for more information see capacitor marking. 3 for additional information regarding auto c-spec options, see automotive c-spec information. benefts a ecq2 automotive qualied 55c to 125c operating temperature range su perior fex performance (up to 5 mm) ? l ead (pb)-free, rohs, and reach compliant ? e ia 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 case sizes ? d c voltage ratings of 500 v, 630 v, 1 kv, 1.5 kv, 2 kv, 2.5 kv and 3 kv ? ca pacitance offerings ranging from 1 pf to 39 nf ? a vailable capacitance tolerances of 0.10 pf, 0.25 pf, 0.5 pf, 1%, 2%, 5%, 10% and 20% ? n o piezoelectric noise ? e xtremely low esr & esl ? h igh thermal stability ? h igh ripple current capability ? p referred capacitance solution at line frequencies & into the mhz range ? n o capacitance change with respect to applied rated dc voltage ? n egligible capacitance change with respect to temperature from &wr& ? n o capacitance decay with time ? n on-polar device, minimizing installation concerns sxuhpdwwhwlqsodwhgwhuplqdwlrqqlvkdoorzlqjiru excellent solderability applications 7slfdodssolfdwlrqvlqfoxghvzlwfkprghsrzhuvxssolhvlqsxwowhuvuhvrqdwruvwdqnflufxlwvvqxeehgflufxlwvrxwsxwowhuvkljk yrowdjhfrxsolqjdqg&eorfnlqjoljkwlqjedoodvwvyrowdjhpxowlsolhuflufxlwv&&frqyhuwhuvdqgfrxsolqjfdsdflwruvlqxn frqyhuwhuv0dunhwvlqfoxghsrzhuvxsso/&xruhvfhqwedfnoljkwedoodvwv,oljkwlqjwhohfrphtxlsphqwlqgxvwuldodqgphglfdo equipment/control, lan/wan interface, analog and digital modems, and automotive. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 automotive c-spec information kemet automotive grade products meet or exceed the requirements outlined by the automotive electronics council. details regarding test methods and conditions are referenced in document aecCq200, stress test qualif cation for passive components. these products are supported by a product change notif cation (pcn) and production part approval process warrant (ppap). automotive products offered through our distribution channel have been assigned an inclusive ordering code c-spec, "auto". this c-spec was developed in order to better serve small and medium sized companies that prefer an automotive grade component without the requirement to submit a customer source controlled drawing (scd) or specif cation for review by a kemet engineering specialist. this c-spec is therefore not intended for use by kemets oem automotive customers and are not granted the same privileges as other automotive c-specs. customer pcn approval and ppap request levels are limited (see details below). product change notif cation (pcn) the kemet product change notif cation system is used to communicate primarily the following types of changes: ? product/process changes that affect product form, f t , function, and /or reliability ? changes in manufacturing site ? product obsolescence kemet automotive c-spec customer notif cation due to: days prior to implementation process/product change obsolescence* kemet assigned 1 yes (with approval and sign off) yes 180 days minimum auto yes (without approval) yes 90 days minimum 1 .(0(7dvvljqhg&6shfvuhtxluhwkhvxeplwwdoridfxvwrphu6&rufxvwrphuvshflfdwlrqiruuhylhz)rudgglwlrqdolqirupdwlrqfrqwdfw.(0(7 production part approval process (ppap) the purpose of the production part approval process is: ? to ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. ? to provide the evidence that all customer engineering design record and specif cation requirements are properly understood and fulf lled by the manufacturing organization. ? to demonstrate that the established manufacturing process has the potential to produce the part kemet automotive c-spec ppap (product part approval process) level 1 2 3 4 5 kemet assigned 1 auto 1 .(0(7dvvljqhg&6shfvuhtxluhwkhvxeplwwdoridfxvwrphu6&rufxvwrphuvshflfdwlrqiruuhylhz)rudgglwlrqdolqirupdwlrqfrqwdfw.(0(7 part number specif c ppap available product family ppap only surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 dimensions C millimeters (inches) l b w s t eia size code metric size code l length w width t thickness b bandwidth s separation minimum mounting technique 0805 2012 2.00 (.079) 0.30 (.012) 1.25 (.049) 0.30 (.012) see table 2 for thickness 0.50 (0.02) 0.25 (.010) 0.75 (.030) solder wave or solder refow 1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.35 (.013) 0.60 (.024) 0.25 (.010) n/a 1210 3225 3.30 (.130) 0.40 (.016) 2.60 (.102) 0.30 (.012) 0.60 (.024) 0.25 (.010) solder refow only 1808 4520 4.70 (.185) 0.50 (.020) 2.00 (.079) 0.20 (.008) 0.70 (.028) 0.35 (.014) 1812 4532 4.50 (.178) 0.40 (.016) 3.20 (.126) 0.30 (.012) 0.70 (.028) 0.35 (.014) 1825 4564 4.60 (.181) 0.40 (.016) 6.40 (.252) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2220 5650 5.90 (.232) 0.75 (.030) 5.00 (.197) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2225 5664 5.90 (.232) 0.75 (.030) 6.40 (.248) 0.40 (.016) 0.70 (.028) 0.35 (.014) qualifcation/certifcation automotive grade products meet or exceed the requirements outlined by the automotive electronics council. details regarding test methods and conditions are referenced in document aecCq200, stress test qualifcation for passive components. for additional information regarding the automotive electronics council and aecCq200, please visit their website at www.aecouncil.com. environmental compliance lead (pb)-free, rohs, and reach compliant without exemptions. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 electrical parameters/characteristics item parameters/characteristics operating temperature range ?55c to +125c capacitance change with reference to +25c and 0 vdc applied (tcc) 30 ppm/oc aging rate (maximum % capacitance loss/decade hour) 0% 1 dielectric withstanding voltage (dwv) 150% of rated voltage for voltage rating of < 1,000 v 120% of rated voltage for voltage rating of 1,000 v (5 1 seconds and charge/discharge not exceeding 50 ma) 2 dissipation factor (df) maximum limit at 25oc 0.1% 3 insulation resistance (ir) limit at 25c 1,000 megohm microfarads or 100 g (500 vdc applied for 120 5 seconds at 25c) 1 dwv is the voltage a capacitor can withstand (survive) for a short period of time. it exceeds the nominal and continuous working voltage of the capacitor. 2 capacitance and dissipation factor (df) measured under the following conditions: 1 m hz 100 khz and 1.0 vrms 0.2 v if capacitance 1,000 pf 1 k hz 50 hz and 1.0 vrms 0.2 v if capacitance > 1,000 pf 3 to obtain ir limit, divide m-f value by the capacitance and compare to g limit. select the lower of the two limits. n ote: when measuring capacitance it is important to ensure the set voltage level is held constant. the hp4284 and agilent e4980 have a feature known as automatic level control (alc). the alc feature should be switched to on. post environmental limits high temperature life, biased humidity, moisture resistance dielectric rated dc voltage capacitance value dissipation factor (maximum %) capacitance shift insulation resistance c0g all all 0.5 0.3% or 0.25 pf 10% of initial limit surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 1a C capacitance range/selection waterfall (0805 C 1808 case sizes) *capacitance range includes e24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. capacitance cap code case size/series c0805x c1206x c1210x c1808x voltage code c b d c b d f g c b d f g c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1.0 - 9.1 pf* 109 - 169* b c d dg dg dg lb lb lb lb lb lb lb 10 pf 100 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 11 pf 110 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 12 pf 120 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 13 pf 130 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 15 pf 150 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 16 pf 160 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 18 pf 180 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 20 pf 200 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 22 pf 220 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 24 pf 240 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 27 pf 270 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 30 pf 300 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 33 pf 330 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 36 pf 360 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 39 pf 390 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 4 3 pf 430 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 47 pf 470 f g j k m dg dg dg eu eu eu eu eu fm fm fm fm fm lb lb lb lb lb lb lb 51 pf 510 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 56 pf 560 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 62 pf 620 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 68 pf 680 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 75 pf 750 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 82 pf 820 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 91 pf 910 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lb lb 100 pf 101 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lc lb 110 pf 111 f g j k m dg dg dg ef ef ef eu eu fm fm fm fm fm lb lb lb lb lb lc lb 120 pf 121 f g j k m dg dg dg ef ef ef eu eu fz fz fz fm fm la la la la lb lc lb 130 pf 131 f g j k m dg dg dg ef ef ef eu eu fz fz fz fm fm la la la la lb lc lc 150 pf 151 f g j k m dg dg dg ef ef ef eu eu fz fz fz fm fm la la la la lb lc lc 160 pf 161 f g j k m dg dg dg ef ef ef eu eu fz fz fz fm fm la la la la lc lc lc 18 0 pf 181 f g j k m dg dg dg ef ef ef eu eu fz fz fz fm fm la la la la lc lc lc 200 pf 201 f g j k m dg dg dg ef eu eu eu eu fz fz fz fm fm la la la la lc lc 220 pf 221 f g j k m dg dg dg ef eu eu eu eu fz fz fz fm fm la la la la lc lc 240 pf 241 f g j k m dg dg dg ef eu eu eu eu fz fz fz fm fm la la la lb lc lc 270 pf 271 f g j k m dg dg dg ef eu eu eu eu fz fz fz fk fk la la la lb lc lc 300 pf 301 f g j k m dg dg ef eu eu eu fz fz fz fk fk la la la lb lc lc 330 pf 331 f g j k m dg dg ef eu eu eu fz fz fz fk fk la la la lb lc lc 360 pf 361 f g j k m dg dg eu eu eu eu fz fz fz fk fs la la la lb la lc 390 pf 391 f g j k m dg dg eu eu eu eu fz fz fz fk fs la la la lb la lc 430 pf 431 f g j k m dg dg eu eu eu eu fz fm fm fs fs la lb lb lc la 470 pf 471 f g j k m dg dg eu eu eu eu fz fm fm fs fs la lb lb lc la 510 pf 511 f g j k m dg dg eu eu eu eu fz fm fm fs fs la lb lb lc lb 560 pf 561 f g j k m dg dg eu eu eu eu fz fm fm fs fs la lb lb lc lb 620 pf 621 f g j k m dg eu eu eu fz fm fm fs fs la lb lb la lc 680 pf 681 f g j k m dg eu eu eu fz fm fm fs fs lb lb lb la lc 750 pf 751 f g j k m dg eu ef eu fz fm fm fm lb lb lb la 8 20 pf 821 f g j k m dg eu ef eu fz fm fm fm lb lb lb la 910 pf 911 f g j k m eu ef eu fm fm fm fy lb lb lb la 1,000 pf 102 f g j k m eu ef eu fm fm fm fy lb lb lb lb capacitance cap code rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d f g c b d f g c b d f g z h case size/series c0805x c1206x c1210x c1808x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 1a C capacitance range/selection waterfall (0805 C 1808 case sizes) contd *capacitance range includes e24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. capacitance cap code case size/series c0805x c1206x c1210x c1808x voltage code c b d c b d f g c b d f g c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1,100 pf 112 f g j k m ef eu fm fk fk fs lc lc lc lb 1,200 pf 122 f g j k m ef eu fm fk fk fs lc lc lc lc 1,300 pf 132 f g j k m ef eu fm fs fs lc lc lc lc 1,500 pf 152 f g j k m ef eu fk fs fs lc lc lc lc 1,600 pf 162 f g j k m ef eu fk fs fs lc lc lc 1,800 pf 182 f g j k m ef eu fk fs fs lc lc lc 2,000 pf 202 f g j k m eu eq fk fl fs lc la lb 2,200 pf 222 f g j k m eu eq fk fl fs lc la lb 2,400 pf 242 f g j k m eu eq fs fl fs lc la lb 2,700 pf 272 f g j k m eu eq fs fl fs lc la lc 3,000 pf 302 f g j k m eq eq fs fl la la 3,300 pf 332 f g j k m eq eq fs fm la la 3,600 pf 362 f g j k m er er fl fm la lb 3,900 pf 392 f g j k m er er fl fy la lb 4,300 pf 432 f g j k m es es fm fy la lc 4,700 pf 472 f g j k m es es fm fy la lc 5,100 pf 512 f g j k m fy fs la 5,200 pf 562 f g j k m fy fs lb 6,200pf 622 f g j k m fy fe lc 6,800pf 682 f g j k m fy fe lc 7,500pf 752 f g j k m fs 8,200pf 822 f g j k m fs capacitance cap code rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d f g c b d f g c b d f g z h case size/series c0805x c1206x c1210x c1808x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 1b C capacitance range/selection waterfall (1812 C 2225 case sizes) *capacitance range includes e24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. cap cap code case size/series c1812x c1825x c2220x c2225x voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 10 pf 100 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 11 pf 110 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 12 pf 120 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 13 pf 130 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 15 pf 150 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 16 pf 160 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 18 pf 180 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 20 pf 200 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 22 pf 220 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 24 pf 240 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 27 pf 270 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 30 pf 300 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 33 pf 330 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 36 pf 360 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 39 pf 390 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 4 3 pf 430 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 47 pf 470 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 51 pf 510 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 56 pf 560 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 62 pf 620 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 68 pf 680 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 75 pf 750 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 82 pf 820 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 91 pf 910 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 100 pf 101 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 110 pf 111 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 120 pf 121 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 130 pf 131 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 150 pf 151 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 16 0 pf 161 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 180 pf 181 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 200 pf 201 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk kf kf kf kf kf kf kf 220 pf 221 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk kf kf kf kf kf kf kf 240 pf 241 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 270 pf 271 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 300 pf 301 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 330 pf 331 f g j k m gh gh gh gh gh gk go je je je je je jk jk ke ke ke ke ke ke kf 360 pf 361 f g j k m gk gk gk gk gh gk go je je je je je jk jk ke ke ke ke ke ke kf 390 pf 391 f g j k m gk gk gk gk gk gk go je je je je je jk jk ke ke ke ke ke ke kf 430 pf 431 f g j k m gk gk gk gk gk gk hj hj hj hj hj hj hj je je je je je jk je ke ke ke ke ke ke kf 470 pf 471 f g j k m gk gk gk gk gk gk hj hj hj hj hj hj hj je je je je je jk jk kf kf kf kf ke ke kf 510 pf 511 f g j k m gh gh gh gk gh gm hj hj hj hj hj hj hj jk jk jk jk jk jk jk kf kf kf kf ke ke kf 560 pf 561 f g j k m gh gh gh gk gh g m hj hj hj hj hj hj hj jk jk jk jk jk jk jl kf kf kf kf ke ke kf 620 pf 621 f g j k m gh gh gh gk gh gm hk hk hk hk hk hk hk jk jk jk jk jk jk jl kf kf kf kf ke kf kh 680 pf 681 f g j k m gh gh gh gk gh go hk hk hk hk hk hk hk je je je jk jk jk jl kf kf kf kf ke kf kh 750 pf 751 f g j k m gh gh gh gk gk je je je jk jk jk jl ke ke ke kf ke kf kh 820 pf 821 f g j k m gh gh gh gk gk je je je jk jk jk jn ke ke ke kf ke kf kj 910 pf 911 f g j k m gh gh gh gh gm je jk jk jk jk jk jn ke ke ke kf ke kf kj 1,000 pf 102 f g j k m gh gh gh gh gm je jk jk jk jk jk jn ke ke ke kf ke kf kj 1,100 pf 112 f g j k m gh gk gk gh go hj hj hj hj hj hj je jk jk jk jk jk ke ke ke kf kf kf cap cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h case size/series c1812x c1825x c2220x c2225x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
9 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 1b C capacitance range/selection waterfall (1812 C 2225 case sizes) contd *capacitance range includes e24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. cap cap code case size/series c1812x c1825x c2220x c2225x voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1,200 pf 122 f g j k m gh gk gk gh go hj hj hj hj hj hj je jk jk jk jk jl ke ke ke kf kf kf 1,300 pf 132 f g j k m gh gk gk gh go he he he he he hj je jk jk jk je jl ke ke ke kf kf kh 1,500 pf 152 f g j k m gk gk gk gk go he he he he he hk je jk jk jk je jl ke ke ke kf kf kh 1,600 pf 162 f g j k m gk gk gk gk hg hg hg hg hg hk je jk jk jk je jl ke ke ke kf ke kh 1,800 pf 182 f g j k m gk gk gk gm hg hg hg hg hg je jk jk jk je jn ke ke ke kf ke kh 2,000 pf 202 f g j k m gk gk gk gm he he he he hj je jk jk je jk ke ke ke kf ke kj 2,200 pf 222 f g j k m gk gk gk go he he he he hj je jk jk je jk ke ke ke kf kf kj 2,400 pf 242 f g j k m gk gh gk go he he he he hj jk jk jk je jl ke ke ke ke kh 2,700 pf 272 f g j k m gk gh gk go he he he he hk jk jk jk je jl ke ke ke ke kh 3,000 pf 302 f g j k m gk gh gk he he he he hk jk jk jk je jl ke ke ke ke kh 3,300 pf 332 f g j k m gk gh gk hg hg hg hg jk jk jk jk jn ke ke ke ke kj 3,600 pf 362 f g j k m gk gh gm hg hg hg hg jk jk jk jk jn ke kf kf kf kj 3,900 pf 392 f g j k m gk gh gm hj hj hj hj jk jk jk jk jn ke kf kf kf kj 4,300 pf 432 f g j k m gh gh go hj hj hj hj jk jk jk jk ke kf kf kf 4,700 pf 472 f g j k m gh gh go hj hj hj hj jk jk jk jl ke kf kf kh 5,100 pf 512 f g j k m gh gk go he he h g hk jk jk jk jl ke kf kf kh 5,600 pf 562 f g j k m gh gk go he he hg hk jk jk jk jn ke kf kf kh 6,200 pf 622 f g j k m gh gk he he hg jk je je jn ke kf kf kj 6,800 pf 682 f g j k m gh gm he he hj jk je jk jn ke kf kf kj 7,50 0 pf 752 f g j k m gh gm he he hj jk je jk kf ke kf 8,200 pf 822 f g j k m gk go he he hj jk je jl kf ke kf 9,100 pf 912 f g j k m gm go he hg hk je je jl kf ke kh 10,000 pf 103 f g j k m gm go he hg hk je je jl kf ke kh 12,000 pf 123 f g j k m go he hg je jk jn ke ke kh 15,000 pf 153 f g j k m go he hj je jl ke kf kj 18,000 pf 183 f g j k m hg hk je jl ke kh 22,000 pf 223 f g j k m hj jk jn kf kj 27,000 pf 273 f g j k m hj jl jn kf kj 33,000 pf 333 f g j k m hk jn kh 39,000 pf 393 f g j k m kj cap cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h case size/series c1812x c1825x c2220x c2225x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
10 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 2 C chip thickness/tape & reel packaging quantities thickness code case size thickness range (mm) paper quantity plastic quantity 7" reel 13" reel 7" reel 13" reel dg 805 1.25 0.15 0 0 2,500 10,000 eq 1206 0.78 0.20 4000 10000 4,000 10,000 ef 1206 1.20 0.15 0 0 2,500 10,000 eu 1206 1.60 0.25 0 0 2,000 8,000 er 1206 0.90 0.20 0 0 4,000 10,000 es 1206 1.00 0.20 0 0 2,500 10,000 fe 1210 1.00 0.10 0 0 2,500 10,000 fz 1210 1.25 0.20 0 0 2,500 10,000 fl 1210 1.40 0.15 0 0 2,000 8,000 fm 1210 1.70 0.20 0 0 2,000 8,000 fy 1210 2.00 0.20 0 0 2,000 8,000 fk 1210 2.10 0.20 0 0 2,000 8,000 fs 1210 2.50 0.30 0 0 1,000 4,000 la 1808 1.40 0.15 0 0 1,000 4,000 lb 1808 1.60 0.15 0 0 1,000 4,000 lc 1808 2.00 0.15 0 0 1,000 4,000 gh 1812 1.40 0.15 0 0 1,000 4,000 gk 1812 1.60 0.20 0 0 1,000 4,000 gm 1812 2.00 0.20 0 0 500 2,000 go 1812 2.50 0.20 0 0 500 2,000 he 1825 1.40 0.15 0 0 1,000 4,000 hg 1825 1.60 0.20 0 0 1,000 4,000 hj 1825 2.00 0.20 0 0 500 2,000 hk 1825 2.50 0.20 0 0 500 2,000 je 2220 1.40 0.15 0 0 1,000 4,000 jk 2220 1.60 0.20 0 0 1,000 4,000 jl 2220 2.00 0.20 0 0 500 2,000 jn 2220 2.50 0.20 0 0 500 2,000 ke 2225 1.40 0.15 0 0 1,000 4,000 kf 2225 1.60 0.20 0 0 1,000 4,000 kh 2225 2.00 0.20 0 0 500 2,000 kj 2225 2.50 0.20 0 0 500 2,000 thickness code case size thickness range (mm) 7" reel 13" reel 7" reel 13" reel paper quantity plastic quantity package quantity based on fnished chip thickness specifcations. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
11 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 table 3 C chip capacitor land pattern design recommendations per ipcC7351 eia size code metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) c y x v1 v2 c y x v1 v2 c y x v1 v2 0805 2012 0.99 1.44 1.66 4.47 2.71 0.89 1.24 1.56 3.57 2.11 0.79 1.04 1.46 2.42 1.81 1206 3216 1.59 1.62 2.06 5.85 3.06 1.49 1.42 1.96 4.95 2.46 1.39 1.22 1.86 4.25 2.16 1210 3225 1.59 1.62 3.01 5.90 4.01 1.49 1.42 2.91 4.95 3.41 1.39 1.22 2.81 4.25 3.11 1808 4520 2.30 1.75 2.30 7.40 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40 1812 4532 2.10 1.80 3.60 7.0 0 4.60 2.00 1.60 3.50 6.10 4.00 1.90 1.40 3.40 5.40 3.70 1825 4564 2.15 1.80 6.90 7.10 7.9 0 2.05 1.60 6.80 6.20 7.30 1.95 1.40 6.70 5.50 7.0 0 2220 5650 2.85 2.10 5.50 8.80 6.50 2.75 1.90 5.40 7.9 0 5.90 2.65 1.70 5.30 7. 20 5.60 2225 5664 2.85 2.10 6.90 8.80 7.9 0 2.75 1.90 6.80 7.9 0 7.30 2.65 1.70 6.70 7. 20 7.0 0 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. kemet only recommends wave soldering of eia 0603, 0805 and 1206 case sizes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). image below based on density level b for an eia 1210 case size. y c c x x v1 v2 grid placement courtyard y surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
12 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 soldering process recommended soldering technique: ? s older wave or solder refow for eia case sizes 0603, 0805 and 1206 ? a ll other eia case sizes are limited to solder refow only recommended refow soldering profle: kemets families of surface mount multilayer ceramic capacitors (smd mlccs) are compatible with wave (single or dual), convection, ir or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet s recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/j-std-020 standard for moisture sensitivity testing. these devices can safely withstand a maximum of three refow passes at these conditions. storage and handling ceramic chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureC reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 70% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. profle feature termination finish snpb 100% matte sn preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/second maximum 3c/second maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 235c 260c time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/second maximum 6c/second maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum 1rwhoowhpshudwxuhvuhihuwrwkhfhqwhuriwkhsdfndjhphdvxuhgrqwkh fdsdflwruergvxuidfhwkdwlvidflqjxsgxulqjdvvhpeouhrz time temperature t smin 25 c to peak t l t s 25 t p t smax t l t p maximum ramp up rate = 3 c/sec maximum ramp down rate = 6 c/sec surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
13 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 construction dielectric material (cazro 3 ) detailed cross section inner electrodes (ni) barrier layer (ni) termination finish (100% matte sn) inner electrodes (ni) dielectric material (cazro 3 ) epoxy layer (ag) end termination/ external electrode (cu) barrier layer (ni) termination finish (100% matte sn) epoxy layer (ag) end termination/ external electrode (cu) capacitor marking (optional): laser marking option is not available on: ? c 0g, ultra stable x8r and y5v dielectric devices ? e ia 0402 case size devices ? e ia 0603 case size devices with flexible termination option. ? k ps commercial and automotive grade stacked devices. these capacitors are supplied unmarked only. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
14 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 tape & reel packaging information kemet offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with eia standard 481. this packaging system is compatible with all tape-fed automatic pick and place systems. see table 2 for details on reeling quantities for commercial chips. 8 mm, 12 mm or 16 mm carrier tape 178 mm (7.00") or 330 mm (13.00") anti-static reel embossed plastic* or punched paper carrier. embossment or punched cavity anti-static cover tape (.10 mm (.004") maximum thickness) chip and kps orientation in pocket (except 1825 commercial, and 1825 and 2225 military) *eia 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. kemet ? bar code label sprocket holes table 5 C carrier tape conf guration, embossed plastic & punched paper (mm) eia case size tape size (w)* embossed plastic punched paper 7" reel 13" reel 7" reel 13" reel pitch (p 1 )* pitch (p 1 )* 01005 C 0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206 C 1210 8 4 4 4 4 1805 C 1808 12 4 4 1812 12 8 8 kps 1210 12 8 8 kps 1812 & 2220 16 12 12 array 0508 & 0612 8 4 4 5hihuwr)ljxuhvirudqg3 1 carrier tape reference locations. 5hihuwr7deohviruwrohudqfhvshflfdwlrqv new 2 mm pitch reel options* packaging ordering code (c-spec) packaging type/options c-3190 automotive grade 7" reel unmarked c-3191 automotive grade 13" reel unmarked c-7081 commercial grade 7" reel unmarked c-7082 commercial grade 13" reel unmarked ppslwfkuhhorqodydlodeohiru(,fdvhvlh ppslwfkuhhoiru(,fdvhvlhxqghughyhorsphqw benef ts of changing from 4 mm to 2 mm pitching spacing ? lower placement costs ? double the parts on each reel results in fewer reel changes and increased eff ciency ? fewer reels result in lower packaging, shipping and storage costs, reducing waste surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
15 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre elin g cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] table 6 ? embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 ,b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.05 (0.138 0.002) 12.0 0.10 (0.157 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape with or without components shall pass around r without damage (see figure 6). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481 paragraph 4.3 section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 4). (e) for kps series product, a 0 and b 0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in eia standard 481 for standards relating to more precise taping requirements. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
16 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 figure 2 C punched (paper) carrier tape dimensions user direct ion of unr eeli ng top cover t ape t center li nes o f cavity p 1 ?do po p 2 e 1 f e 2 w g a 0 b 0 cavity size, see n ote 1, tab le 7 bottom cover tape t 1 t 1 bottom cover tape [10 pitc he s cumulative tolerance on tape 0.2 mm] table 7 ? punched (paper) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 e 1 p 0 p 2 t 1 maximum g minimum r reference note 2 8 mm 1.5 +0.10 -0.0 (0.059 +0.004 -0.0) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.10 (0.004) maximum 0.75 (0.030) 25 (0.984) variable dimensions millimeters (inches) tape size pitch e2 minimum f p 1 t maximum w maximum a 0 b 0 8 mm half (2 mm) 625 (026) 35 005 (0138 0002) 20 005 (0079 0002) 11 (0098) 83 (0327) note 1 8 mm single ( mm) 0 010 (0157 000) 83 (0327) 1. the cavity def ned by a 0 , b 0 and t shall surround the component with suff cient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see figure 3). d) lateral movement of the component is restricted to 0.5 mm maximum (see figure 4). e) see addendum in eia standard 481 for standards relating to more precise taping requirements. 2. the tape with or without components shall pass around r without damage (see figure 6). surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
17 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. 5hihuwr(, 6wdqgdugvdqg . figure 3 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t cente r line typical com po nent centerline figure 4 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tape 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 5 C bending radius r r b en ding radius e mbo ssed carrier p unc hed ca rrier surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
18 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 figure 6 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w 3 (includes flange distortion at outer edge) w 2 (m ea sured at hu b) w 1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n table 8 ? reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 14.4 (0.567) shall accommodate tape width without interference 12 mm 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 18.4 (0.724) 16 mm 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 22.4 (0.882) surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
19 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 figure 7 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 8 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
20 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)
21 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1081_c0g_hv_ft_auto_smd ? 2/29/2016 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500 C 3,000 vdc (automotive grade)

▲Up To Search▲

Price & Availability of C1210X393JZGACAUTO

	To Download C1210X393JZGACAUTO Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .